Does your washing machine sound like it’s about to launch into space during the spin cycle? Does it shake so much you think it might walk away? Don’t panic—this is a very common issue, and you might not need a repairman (or a new machine) to fix it.

Here’s a step-by-step guide to troubleshoot and stop the noise:

1. Remove the Shipping Screws

If your washing machine is new, this is the first thing to check. Washing machines come with shipping bolts that keep the drum stable during transport.

If you forget to remove them, the machine will make loud banging noises and vibrate like crazy!

• Turn off and unplug the washer.
• Check the back for shipping bolts.
• Remove them with a wrench and store them (you may need them if you move the machine again).

2. Make Sure the Machine Is Level

An uneven washing machine = noisy chaos. If the legs aren’t adjusted properly, the drum will bang and shake.

How to level it:

• Use a spirit level (or a level app on your phone).
• Adjust the legs until the machine is stable.
• Push it gently—if it wobbles, keep adjusting.
• Pro Tip: Tighten the locknuts on the legs to prevent them from loosening over time.

3. Check Your Load Distribution

The way you load laundry matters! A single heavy blanket or a few large towels can throw the drum off balance, causing banging during the spin cycle.

Solution:

• Stop the cycle and redistribute the clothes.
• Avoid washing just one bulky item—mix it with smaller items to balance the weight.

4. Inspect the Floor Surface

Your washing machine needs a solid, flat surface. If it’s on old wooden floors, loose tiles, or an unstable base, vibrations will be worse.

Fix it:

• Place it on a sturdy, level surface (cement is ideal).
• Use an anti-vibration mat or thick rubber pads.
• Avoid placing it on weak or uneven platforms.

5. Check the Internal Shock Absorbers (Advanced)

If all else fails, the issue may be with the internal shock absorbers. These parts absorb the drum’s impact during spinning. When they wear out, the machine becomes unstable.

Warning: This requires opening the machine—only attempt this if you’re confident with basic repairs.

When to Call a Technician

You’ve tried everything but the machine is still shaking? It’s time to call in the pros if:

• The problem persists despite all fixes.
• You notice water leaks.
• The drum feels loose or makes loud metallic noises.
• There’s a burning smell (unplug immediately!).

Conclusion

Often, the solution is simple: remove shipping bolts, level the machine, and balance your laundry. These quick fixes can save you money, time, and stress—and keep your washer running smoothly.